Alemlube Manual Waste Oil Extractor 41006N

Alemlube Manual Waste Oil Extractor

The Alemlube upgraded 41006N manual waste oil extractor is a versatile, portable and lightweight self contained unit ideal for extracting waste oil from motor vehicles, motor bikes, marine engines, lawn mowers, stationary engines, all terrain vehicles and can also be used for extracting non-lubricants including salt water (bilge) and water.

With a capacity of 6.5 litres the 41006N is supplied complete with a probe kit to suit various dipstick diameters and lengths which is now held in a storage tube connected to the unit to collect excess waste oil left in the probe.

Another new feature is that the extracted waste oil will raise the float in the collection tank and automatically stop when the shut off valve is reached, even if the unit is still under vacuum.
For the utmost convenience, the 41006N manual waste oil extractor can be used when the unit is tilted at any angle, allowing it to be used in almost any application.

It is essential to ensure that a vehicle is level with the engine having been run for 5 minutes prior to extracting waste oil. This lowers the oil’s viscosity facilitating fast, easy extraction.

After completing oil or fluid extraction, remove the main suction tube from the extractor and empty used oil or fluid in a safe and compliant way. Then press the relief valve button on top of the extractor for approximately 5 seconds to release the vacuum.