|Air Delivery||320 LPM @ 100PSI|
|Motor||Honda GX200 (6.5)|
|Tank Size||9 L|
|Dimensions (L x W x H)||865mm x 395mm x 545mm|
|Portable / Stationary||Stationary|
Please note: Air compressors i.e piston type, are not designed to run continuously they must cut in and out. Direct drive models should only have up to a 40-50% duty cycle. Belt Drive hobby models are up to 60-70% and full industrial belt drive models are up to 75-85%. If the compressor runs over these duty cycles it could cause failure. Important – first check voltage on each building site as low voltage will cause the motor to fail on all compressors. It must have better than 230 volts at peak times. Extension leads will cause a voltage drop, it’s better to use an extra air hose.