Description

TECHNICAL SPECIFICATIONS

Air Delivery	350 LPM @ 100PSI
Cylinders	2 x 2
Max PSI	145
Motor	2 x 2 HP
Pump	Oil Less
Pump RPM	1350
Power Supply	15 AMP
Amps Draw	2 x 6
Tank Size	55 L
Dimensions (L x W x H)	1100mm x 460mm x 730mm
Weight	78kg
Portable / Stationary	Portable
Regulator Included?	ET-250 Water Trap Regulator

Please note: Air compressors i.e piston type, are not designed to run continuously they must cut in and out. Direct drive models should only have up to a 40-50% duty cycle. Belt Drive hobby models are up to 60-70% and full industrial belt drive models are up to 75-85%. If the compressor runs over these duty cycles it could cause failure. Important – first check voltage on each building site as low voltage will cause the motor to fail on all compressors. It must have better than 230 volts at peak times. Extension leads will cause a voltage drop, it’s better to use an extra air hose.

Additional information

Weight	78 kg
Dimensions	110 × 46 × 73 cm

If you wish to collect your product from our showroom in Canning Vale, please select 'Click & Collect' at check out.

ADDRESS
1/19 Mordaunt Circuit
Canning Vale
Perth 6155

CALL
1300 062 377

FAST DISPATCH

Tracking number emailed instantly after dispatch
Your item will be shipped via Courier which requires a signature for collection.
Phone number required: Our courier will call to book the delivery day.
A delivery day, not time: Our discounted rates require you to be home 9am-6pm on the day of delivery. Perhaps a business address is more convenient for you.