SMC Mist Separators
SMC Mist Separators are perfect for separating and removing aerosol state oil mist in compressed air. It can also be used to remove particles such as carbon or dust. You can use it as a pre-filter for compressed air for precision instruments or clean room requiring higher clean air.
- Can separate and absorb aerosol state fine oil particles and change oil-lubricated compressed air to the equivalent of oilless air
- Should be applied for the filtration of compressed air that requires high-degree cleanliness, such as the compressed air used for coating lines, clean rooms, and equipment that must remain oil free
SMC’s Mist Separators can separate and remove oil mist in compressed air, which is difficult to remove by ordinary air filters and removes solid particles such as rust or carbon of more than 0.3 micron. It is the most suitable for air sources that drive pilot, metal seal solenoid valves.
Series AME separates and adsorbs aerosol state fine oil particles in compressed air and changes the oil lubricating compressed air to oil-free equivalent air. It should be applied for filtration of compressed air requiring high cleanliness for coating lines, compressed air for clean rooms and compressed air for equipment necessary to avoid oils.
Series AMD is a secondary stage of coalescing filtration to remove particles of 0.01 micron from compressed air. Applied properly, they can reduce oil carryover to 0.1 mg/m³ / 0.08 ppm or less (ISO8573-1 class 2 oil carryover).
Airtools WA are also the proud suppliers of SMC’s Water Separators and Odour Removal Filter range. We only provide the best quality products, and that’s exactly what you’re getting from SMC.
View – Do I need a Mist Separator?
Also see our range of:
Ask us anything about AIR!
Give us a call today on 1300 062 377 or email us here to find out more about our range of mist separators.
