Description
Water Separator Trap 1/4″ SMC AMG150C-02D
Remove bulk water from your compressed air system with an AMG series SMC water separator / water trap. These are best fitted before the point of use. The AMG SMC water separators trap 99% of water and are fitted with an auto drain to the bowl. These water traps can be used before a refrigerated air dryer to lessen the load on the dryer to achieve a lower pressure dew point. Very low pressure drop and an operating range of 0.15 to 1.0 MPa. The device is self-cleaning and thus maintenance free. They can be connected into pipework or hung using the optional bracket assembly.
The Water Separator Trap 1/4″ SMC AMG150C-02D suits compressors up to 2.2kw / 3hp
A water separator removes water droplets in compressed air. Use this product in cases where “water must be avoided, but not so dry as when an air dryer is used”.
Through the adoption of an element that is exclusively used for removing water droplets and the ample housing interior space, a 99%∗ water removal rate has been achieved.
SMC Water Separator Range (Click to view)
- 1/4 inch SMC AMG150C-02D
- 3/8 inch SMC AMG250C-03D
- 1/2 inch SMC AMG350C-04D
- 3/4 inch SMC AMG450C-06D
- 1 inch SMC AMG550C-10D
- 1-1/2 inch SMC AMG650-14D
- 2 inch SMC AMG850-20D
SPECIFICATIONS
| Attribute | Value |
| Manufacturer Series | AMG |
| Filter Type | Water Separator |
| Body Size | 150C |
| Maximum Air Flow | 10 cfm |
| Typical Flow | 300 L/min |
| Typical Flow Rated At | 0.7MPa |
| Port Connection | 1/4 BSPT |
| Element Material | Resin |
| Minimum Operating Temperature | +5°C |
| Maximum Operating Temperature | +60°C |
| Maximum Operating Pressure | 1.0 Pa |
| Port Connection Thread Standard | Rc |
| Minimum Operating Pressure | 0.1MPa |
Image may not represent actual item. Refer to title and product specs for all details.
Airtools WA are also the proud suppliers of SMC’s Micro Mist Separator and Odour Removal Filter range. We only provide the best quality products, and that’s exactly what you’re getting from SMC.
